Saturday, 1 August 2009

Usb Cooling Fan - usb fan, cooling


I house my PC inside a 15" wide base cabinet below the workspace in my basement-level office. I have to keep the cabinet door closed (locked actually) to keep the children from turning the unit off and on. Unfortunately, the inside of the cabinet gets pretty hot from the PC due to the lack of circulation. I needed an inexpensive, convenient, and safe way to keep the cabinet cool. I purchased the Thermaltake Desktop USB Cooling Fan, cut a 3.5" square opening on the side of the cabinet, and installed the fan facing out of the openning to draw the warm air out. This solution worked perfectly! I can adjust the Thermaltake fan speed up if I'm running CPU intensive applications - like games or watching a DVD - to draw more air. The fan is very quite - unnoticable really, and the fan grill keeps little fingers from touching the fan blade. I would highly recommend this product. Thermaltake Mobile Fan II External USB Cooling Fan - Us

I use this to cool my PowerBook G4. The laptop is up on a simple stand, but it runs pretty hot; the CPU often runs up to 142+ degrees F, at which point the noisy internal fans turn on. With the little TT fan blowing across the keyboard area, the PowerBook seldom reaches 140 degrees, and the internal fans almost never kick in. The TT fan is nearly silent at its lowest levels, very quiet at the level I use (~halfway up), and not terribly loud even at its highest setting. It's definitely got a DIY-geeky look, but at least it's not geek-bling with pulsing LEDs or anything. My one big knock against it is its lack of an off switch. Seems like it would have been simple enough to have it click off when you turn it all the way down; as it is, I have to unplug it at the end of the day.

I have an external hard drive that is "air-cooled" but it is in a location where air circulation is somewhat blocked. This little fan takes care of that problem and keeps it running cool. I had tried battery-powered fans, but the batteries would die too quickly. If I'm not using the external HD, I just reposition the fan to provide extra circulation for the tower.



This fan is extremely quiet and works unobtrusively. I don't even hear it running. Since I normally shut off my computer when I'm done, I'm not really bothered by the lack of an on-off switch.



This fan is a great solution to one of life's annoying little problems. :-)

Both my PS3 and XBOX 360 have a pair of these each: One assisting with the 'heat exhaust' in the back of the units (helping to blow air OUT and away from the consoles) and one blowing towards the 'air intake' vents' and back. The hot air comes out noticeably faster out the exhausts of both consoles.



I've only tried the Pelican Air Flo for the PS3 (and heard the horror stories of Nyko intercoolers for XBOX 360),but that alone was horrible. Tried two units bc the fan didn't turn on (supposed to start automatically when it senses heat) and both failed! Stay away from these after market fans and get the Thermaltake Mobile Fan II!



TWO CONS: not as aesthetically pleasing (This might turn some people off, but I don't care about the aesthetics bc it does the job awesome) and with the XBox 360, it doesn't power down with the console. I have an older 10/06 Xbox and and Elite, and its the same with both. (The USB outputs still feed power after powerdown...ie to charge controllers via cable) With PS3, it starts up and powers down with the console perfectly!



Now if only someone could recommend a good powered USB hub that can work without being hooked up to a PC or console. We could alleviate hooking these up to consoles/laptops altogether and put that USB Hub AC Adapter on a X10 adapter for wireless action! Any suggestions?

Since this is a modified case fan, it's incredibly reliable and quiet. Those cute USB fly fans barely move any air and fail after a few weeks of use. If you can take the semi-industrial / geek look, it performs fine as a personal desk fan. You'll get lot's of comments from your cube visitors.



I am also using this to cool my A/V cabinet which contains an extremely hot running Motorola cable PVR.



Currently out of stock everywhere! Please make and sell more of these!

My Tivo was overheating during the summer because of poor air circulation around the built-in shelf on which it sat. I had tried other solutions, including a couple "laptop cooler" pads, but nothing worked particularly well. Then I bought one of these little fans, hooked it up to a USB port on the Tivo, set it to blow the warm air out of the shelf space to the front of the cabinet and watched the Tivo's temp drop a good ten degrees, well into the safe range.



These fans are extremely quiet (though I put it on a small rubber pad to cut down on vibration with the shelf.) As other's have noted, an on-off switch would be nice as I don't need it running all the time. Some kind of USB thermostat would make it perfect (but you wouldn't get it for anything like this price.)



Great product at a decent price. I'm going to order a couple more to cool a cabinet of network gear and the whole-house audio equipment I have in a closet. - Usb - Cooling - Usb Fan - Fan'


Detail Products
Detail Reviews
Click here for more information


Planet Of The Apes - post-apocalypti, dvd


This above average 1974 TV spin off from the enormously popular Planet of the Apes Films only ran for 14 episodes.

But as a; "Simian Saga" fan I'm very glad it's finally got released.

Three Astronauts travel through a time warp in their ship, and end up going from 1981 to crashland on 3085 Earth.

One Astronaut doesn't survive the landing, these episodes concern the adventures of the two survivors as they try to understand what's happened to themselves and the world around them, and hopefully get back to their own time.

They also team up with a chimpanzee called Galen, and all three go on the run. Suspicious of everyone they meet, both Apes and Humans.

You'll have to buy it to find out more as I don't do spoilers.

Some of the actors are the same as in the Films, but one crucial difference from the films are the Humans on this Earth can talk.

It was good to see Roddy McDowall reprise his role from the films.

Mark Lenard (Spocks Dad Sarek from Star Trek) plays the military commander Urko.

This show is worth a look of anybodys time.

~~~~

List of episodes:~

Escape from Tomorrow.

The Gladiators.

The Trap.

The Good Seeds.

The Legacy.

Tomorrows Tide.

The Surgeon.

The Deception.

The Horse Race.

The Interrogation.

The Tyrant.

The Cure.

The Liberator. (This episode never aired during original run.)

Up above the World so High.

~~~~

The show was eventually cancelled because it didn't score enough ratings in the US.

But it was very popular with viewers (like me) and TV critics in the UK.

A shame. Planet of the Apes: The Complete TV Series

After the success of five Planet of The Apes motion pictures, it was decided to try Television next, casting Roddy McDowall in the lead role as the sympathetic chimpanzee, Galen (the ape role to which McDowall professed as his favorite in later interviews). Ron Harper & James Naughton were cast as astronaut's Alan Virdon and Peter J. Burke who's spaceship gets caught in a time warp, transporting them 2000 years into the future...a world ruled by apes.



Unlike the film series, humans in this time period were able to speak. The TV series had a very unique way of discussing very important topics such as racism, loyalty, honor, as well as the value of ape/human friendship, and many more. Unfortunately the series was cancelled after only 13 broadcasts (having something to do with the fact that CBS put the show up against "Sanford and Son" & "Cheecho and The Man", two of the most popular shows on television at that time..very unwise indeed).



It was only many years later that the show found new life when many episodes were cut and spliced together to form a sort of "Movie Length" that began airing along with TV broadcasts of the theatrical films. Many people began to realize just how good a show Planet of The Apes truly was.



Now, for the very first time (with the exception of Australia), the complete series is available for home viewing..on DVD no less, with the added bonus of an additional episode that never aired originally ("The Liberator"). I have viewed all 14 episodes in this DVD box set and all I can say is "BRAVO! Fox has done it again!" Now don't expect the picture and sound quality to be tremendous, although the picture is very decent and the sound, though presented in Mono, isn't bad either. But considering it's only a TV series, I really wasn't expecting any heavy duty remastering to take place here.



There are four episodes per disc, except for #4 which has two episodes, plus 2 bonus trailers (not indicated on the back of the box) for Planet of The Apes The Evolution Box Set & Planet of The Apes The Tim Burton Film Version. See for yourself why many consider this show a cult classic.



There were only a few things I never understood about it. In the first episode ("Escape From Tomorrow") Virdon (Ron Harper) goes back to the wrecked ship to obtain a small disc that supposedly contains vital information that can only be accessed by a computer, which they begin to search for. But after episode two, this whole idea was forgotten & abandoned, which never really made sense to me because in episode five ("The Legacy") a computer is found underground in a city of ruins.



The other thing that bothered me were all the times we see Virdon & Burke surprise attack an ape and then never bother to take his rifle from him. You'll notice it many times in the show (though sometimes they do take one now and then). But this is small potatoes...the series is wonderful.



The only sad thing is we'll never see how it would've truly ended: Would Virdon & Burke ever get back home? Would Galen come too? Or would they revolutionize the ape ruled world so that apes and humans would live as equals? There were so many ways the series could've gone. But don't let these original 14 episodes pass you by. The set may be short on extra features, but considering the price you pay for 14 episodes (think about how much Paramount charges for all their different Star Trek TV Series), you more than get your money's worth.



Planet Of The Apes The TV Series - A Cult Classic!



Also, check out Return to the Planet of the Apes - The Complete Animated Series :-)

After the success of the 'Planet of the Apes' film franchise, and after several films had brought the storyline almost full circle, it seems with hindsight only natural for the producers and studio to decide to extend the success of this series onto television. The experiment was short-lived, as the 'Planet of the Apes' television series only lasted for half a season (American standard). The shows were very popular in Britain and other nations, but without an American audience (and American advertising dollars coming into the studio), the series was destined to be one of those interesting, irritatingly half-complete storylines.



The special effects in the series were fairly well done, considering items such as the make-up technology (which won awards in the cinematic productions) and sets such as the central ape city were hold-overs from the films. Another carry-forward was Roddy McDowall, who played the leading ape character in most of the films - in the television series, he reprises a similar role, but one with a different history and motivation. The characters of Dr. Zaius, chief scientist and 'defender of the faith', and General Urko, a militant gorilla ('the only good human is a dead human') are also characters held over from the films.



The plot is same as the beginning of the film series - American astronauts somehow land on the earth of the distant future, a thousand years or so, in a post-apocalyptic world where human civilisation has been virtually destroyed, and a dominant race of apes has supplanted them as the authority in the world. Unlike the early films, the humans in this alternate world can talk, read, and live in parallel communities with the apes, although always to varying degrees under ape control and subjugation. There are tantalizing bits of archaeological information that lead the senior apes (Dr. Zaius and a few of his confidants) to the understanding that humans once ruled the world to a much greater degree than the apes, with better technology; however, one understanding central to the ape belief structure is that humankind must be kept subordinate, as the humans are the only species to kill its own kind, and practically destroyed the world in which they (and the predecessors of the apes) lived. Astronauts thus represent a grave threat to the new ape world order - they represent a technological superiority that might infect the humans with ideas of equality.



Thus, Planet of the Apes becomes a morality tale in many ways - rigid beliefs going against common sense, ideas of racial inequality built on prejudice (there is even a minor plot device of prejudice of certain kinds of apes against others - gorillas, orangutans, and chimpanzees often mistrust each other, uniting at times it seems only in their common disdain for humans).



The first episode of the series introduces two new astronaut characters (the most famous of whom, from the first film, was played by Charleton Heston). These two astronauts (a third died in transit, again an idea taken from the films) are Virdon and Burke, played by Ron Harper and James Naughton. After crashing, they are found by sympathetic humans who help hide them; when captured, they escape with the help of an ape named Galen (McDowall), whose common sense forces him to recognise the truth in what the astronauts are saying. Galen, Virdon and Burke then begin a life on the run, both working to stay alive and out of the clutches of Urko (Mark Lenard, perhaps best known for playing roles on Star Trek, including Spock's father, Sarek), and working to find a computer or other technological aid that might get them back home.



There are fourteen episodes in all; these include episodes in which the astronauts introduce techniques of better farming to poor rural folk, new ideas of disease control when a village is struck by malaria, and even build a hang glider to escape from a chimpanzee who wants to use an archaeological find (fragmentary bombs) with the glider for an aerial bombardment against central city. The episodes are fairly formulaic - a problem is presented that hinges upon poor understanding of human potential or previously-known scientific/technological knowledge; either a human or an ape distrusts the trio; the three eventually win over the skeptics with their abilities and basic decency, and then they must run again to avoid discovery.



It is unclear where the series was going to go, had it continued. It was cancelled in mid-season, and the final aired episode literally leaves the astronauts and Galen adrift in the sea, having escaped the authorities once again after having proven their technological superiority. Even with the formula nature of the series, the shows were worthwhile in many respects. I recall seeing this on television first when I was ten years old - to a young person, the plots illustrate their points in the way that fables work (most of the episodes are stories with a moral). When I watched the episodes again via DVD (all fourteen produced are available, including one which was never aired during the original broadcast run), they stood the test of time fairly well. Unlike the original Star Trek series, which, thanks to sets and costumes can often seem very dated, this series has a bit more timelessness to it (although the acting and production values are very much product of the 1970s).



For those who like science fiction in general, and the Planet of the Apes franchise in particular, this is a good series. It might even have some appeal for those who like a bit of fantasy or post-apocalyptic adventure of a very G-rated variety. The DVD has a few extra features - some episode commentaries, and a few theatrical trailers (for the original series of films, and for the more recent remake starring 'Marky' Mark Wahlberg). As a blast from the past (as I remember certain portions of the series, including the final drifting away, quite vividly), watching these was a great treat. - Tv Series - Science Fiction - Post-apocalypti - Dvd'


Detail Products
Detail Reviews
Click here for more information


Aquarium Gloves - dyeing


I purchased these gloves to work in my aquariums. I am a petite person, and it is hard to find any tight-fitting gloves that have long sleeves. These are still a little roomy in the fingers, so I don't get great tactile feel with them, but they came the closest of any others I looked at or purchased. These do not come in a small size; medium was the smallest size I could find on the internet. These are similar in fit to dish-washing gloves, but tougher. They are very durable, and the sleeves do stay up on my arms while I am working. I have thought of getting another pair for household use, like washing the car. Atlas Glove WG772L 26-Inch Long Sleeve Nitrile Coated Cotton Lined Work Gloves, Large

I bought these gloves for two reasons: to clean a 175-gallon salt water tank and to clean an above the ground pool. These gloves work great!They fit well and keep your hands and arms dry and warm. I looked at pet (fish) stores and pool stores for these gloves, but found the least expensive ones on Amazon. I highly recommend these gloves!

I used these gloves on my previous job working at a fast food restaurant (mind you, I never used them on food). they're great for cleaning when you don't want to get your hands dirty and can make a tough job MUCH easier (and cleaner). you need to wash these gloves at least every other day, otherwise mold will start to grow on the inside. The only problem with the gloves is that they smell like anus (me and my brother called them molester-gloves). I've washed them 5 out of 7 days a week for 2 months and they still smell the same as the day they came in the mail...

These gloves turned out to be perfect for my husband to wear while working in the pool. Water can't get inside. I bought him size large, thinking he could wear warm gloves underneath, but the large size fitted his sm/med hands snugly. I would buy more in a minute, but would go up a size. Great product!

I have purchased these gloves three times now. I use them for several hours a day to insulate my hands from extremely hot water and a variety of chemical solutions (mild enough that gloves are not generally considered necessary), and use steel and copper scrubbers with them. With this type of use, a pair lasts a predictable three months before it begins to leak. So if you are purchasing these for occasional use, I would expect them to last a long time.

I got these mainly for gardening. I get the willies when I have to reach in and pick okra and other veggies! But even if a bug gets on my arms, I know I won't be feelin' any bites! They're also great for housework and other jobs where you'd like to protect your hands and arms. They're very thick, but flexible and have a nice lining. I got the medium which fits just a tad big for my hands but is still okay. I use regular nitrile gloves for cooking and these for the tough jobs. Try them!

I bought these to protect my hands from infection (apparently my mother was right--you CAN catch something in there) when cleaning my freshwater aquariums. One is a tall 55gal tank and I have to stick my whole arm in. I am a medium-sized person of about 5'6" and these gloves come nearly to my shoulder and have a strong, but not constrictive elastic band at the top, so the gloves are perfect for keeping my sleeves dry. The nitrile is thin enough to give a reasonable amount of feeling and dexterity. But it's thick enough to be sturdy when knocking against lava rock while scrubbing. They have texture on the fingers/palm for better grab. These feel and wear very similar to those ubiquitous rubber-dipped cotton gardening gloves you find at hardware stores. Sizing seems similar to Atlas Fit Super Grip gardening gloves 12 Pack Atlas Glove 300 Atlas Fit Super Grip Gloves - Medium. I bought a medium-sized set of the 26" gloves and I find they fit perfectly. Large would have been ok, but a bit clumsy for me. Bottom line, these are great and I'll buy more when the time comes to replace them.

This is what we use in our school studio for dyeing. We work around toxic dye powders and chemicals as well as large hot pots of chemicals on the stove, and these will protect you the best. If you dye on a regular basis these are a must to protect yourself. - Dyeing'


Detail Products
Detail Reviews
Click here for more information


Cpu Cooler - cpu cooler, cooling


Although large and heavy, it runs several degrees C cooler than the heatsink/fan delivered with the Intel Quad Core CPU. Running Core Temp, all 4 cores run under 40 C where as the Intel factory provided system was running 44 and higher at idle temps and 65 C + under load, which is what prompted me to purchase a larger heatsink.



I rarely hear the fan spin up faster and never see temps over 45 C even while running gaming applications.





CON: It is large and may require a little caution when installing depending on how your power wiring in your PC is setup. I had to tie one power wire to the case to keep it from touching the heatsink. Also it's own power wire for the fan needs a little care when installing. It can be pulled to tight and interfere with the fan.



Install was simple but does require you remove the motherboard as there is a back plate you must install to support the weight. It does not use the horrible push pin locking system that the factory setup does. Zalman CNPS9900LED Ultra Quiet CPU Cooler

OMG! I can't OC my Phenom from 3.0ghz to 3.8ghz with the stock cpu cooler without reaching 75'C-80'C (its true!)Then I bought this thing and added Arctic Silver 5 as my thermal paste. WHHHOOOAAA!!! Im 3.8ghz now with 57'C-60'C at 100% stress test. Isn't that lovely! Guys Highly recommended for the oc's, it work for me!

This was the easiest to install CPU cooler I have done. An AMD install should take about five minutes to do though it includes brackets for various intel chips as well. Check the Zalman site for animated installation instructions as the paper instructions are difficult to follow (though for an AMD install they are hardly needed). There is a lot of room in my case with plenty of space between the cooler and the graphics card and ram modules. I see a lot of complaints about the copper fins being fragile but mine came with a hard plastic shell around the fins that I left on until I had it secured to the mother-board. I then carefully cut through the shell and had no problem with bent fins or cut hands. The blue led has a subtle glow which is nice. CPU was running at 39 degrees celsius which is fantastic! I'm glad I made this purchase for my new build. Specs below to help out anyone with the same mobo or other wondering if it will fit:



Cooler Master HAF 932 High Air Flow ATX Full Tower Case Black - (RC-932-KKN1-GP)

Gigabyte Socket AM3/AMD 880G/Hybrid CrossFireX/SATA3&USB3.0/A&V&GbE/ATX Motherboard GA-880GA-UD3H

AMD Phenom II X4 955 Black Edition Deneb 3.2GHz Socket AM3 125W Quad-Core Processor HDZ955FBGMBOX

Zalman CNPS9900LED Ultra Quiet CPU Cooler

Sapphire Radeon HD 5770 1 GB DDR5 2DVI/HDMI/DisplayPort PCI-Express Video Card 100283-3L

Corsair CMPSU-650HX 650w HX Series 80 Plus Bronze Certified Power Supply

Crucial RealSSD C300 CTFDDAC064MAG-1G1 2.5" 64GB SATA III MLC Internal Solid State Drive (SSD)

G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL

I am running a core i7 940 and was previously using the Intel stock cooler.



Performance:

I have the fan set to be controlled by the motherboard. When kicking off something like prime 95 you will instantly hear the fan kick up. At normal speeds the fan is pretty silent though. I also do not hear the fan spin up when playing games so the noise of the fan at full throttle doesn't really bother me since I rarely do anything except video encoding that would kick the fan up like prime 95 causes it to.



Temps:

Ambient temps 77-80 F (25 - ~27 Celsius) The basement tends to get warm during the summer.

The ranges are largely due to differences between the 4 cores.



Idle

Stock cooler: 47-51 Celsius

Zalman 9900: 35-40 Celsius



Gaming (Specifically tried World of Warcraft and Borderlands)

Stock cooler: 59-67 Celsius

Zalman 9900: 47-52 Celsius



Full load using Prime 95

Stock cooler: 90-95 Celsius

Zalman 9900: 60-63 Celsius



The full load I found very impressive also I am pleased with gaming temps being around the level it previously idled at.



Construction:

Fairly sturdy structure. The fins are incredibly thin which is excellent for airflow but you must be careful as I could easily see someone cutting themselves on them. The bottom contact surface looked very flat and had a mirror finish. I read reviews of peoples fans causing a rattling noise, but this was not the case for me at any speed. It is big, but due to its circular structure it fits well in my case and I did not have to remove my side 120mm fan that blows on the video card/north bridge area.



Installation:

To install I had to take the motherboard out which wasn't too much trouble since I have a full tower with tons of space. The only really annoying part was screwing the heatsink into the bracket. The one side of copper fins is wider than the other and the screws are unfortunately placed in a difficult to reach spot because of the fins. My advice would be to use a screwdriver with a long slim neck and even then you will be at an angle.



Summary: I would fully recommend this CPU cooler. The installation is what caused me to drop it to 4 stars and also the fact that there are better coolers on the market. For me though the performance was everything I hoped for and looks slick to boot.

Wow, this is awesome. It's brought my idling temp down from about 45°C to around 30°C, and the temp when playing games hasn't gotten more than around 45°C. I do have a case with very good airflow however.



Speaking of cases, if you don't have a big one, then try a smaller one of Zalman's coolers. This thing is preeeeeeeettyyy big.



I love this thing; it keeps everything super cool and it has a blue LED :D.



I would definitely recommend this cooler. Zalman FTW - Cpu Cooler - Cooling - Am3 - Core I7'


Detail Products
Detail Reviews
Click here for more information


Poirot And Hastings


Even though "Hallowe'en Party" was written later in Agatha Christie's career, and some might believe it to be somewhat of a letdown from earlier works, it retains all the trademarks of what make Christie's intricately woven, delightfully detected mysteries so endearing and timeless. With Hercule Poirot serving as the sleuth who steps in to solve the murder, "Hallowe'en Party" is quick-paced and filled with a cast of characters who seemingly all have something to gain, or hide.



When a young teen is found murdered at a Halloween party, Hercule Poirot is called in by a visiting mystery writer. She is troubled by something that the girl had said during preparations for the party. The young victim claims to have seen a murder committed, and Poirot is quick to believe that she was murdered in order for that murder to remain unknown. He soon sets himself to the task of interviewing a wide cast of the town's inhabitants, raising questions about not only present events, but those in the past that just might be connected to the tragedy. When another murder hits too close to home, Poirot knows that he must convince the lawmen in charge that he has fitted the puzzle together correctly.



"Hallowe'en Party" is plotted out to perfection; the solution, and the requisite explanatory chapter in which Poirot explains how he solved the crime at hand, is as ingenious as it is 'right before your eyes' if the reader is paying close attention to the clues. As always, Agatha Christie has fashioned a delectable mystery that has remained timeless in its plot (even if some of the language, and fashions mentioned for that matter, are a bit dated). Hallowe'en Party: A Hercule Poirot Mystery (Hercule Poirot Mysteries)

The story begins innocently enough - a children's Hallowe'en party. One of the adult guests is Ariadne Oliver, the famous crime novelist. One of the children at the party, in order to impress Mrs. Oliver claims to have seen a murder committed. No one takes any notice, dismissing her story, until the girl turns up dead at the end of the party. Horrified by the tragedy, Mrs. Oliver turns to her old friend Hercule Poirot for help, despite her belief that women should be running Scotland Yard! Poirot begins investigating and realizes that the child was killed in order to prevent discovery of another, much older crime. But raking up the past is dangerous as it can cause a killer to strike again...very chilling mystery, notable for its air of subtle menace and cruelty. Although the identity of the killer was fairly obvious midway through the book, I think Christie afficionadoes will like the psychological analysis of the motives for the crime, as well as of the criminal. Another good Poirot mystery.

Agatha Christie was a true mistress at presenting unique mystery plots and shocking conclusions! Although Miss Jane Marple is my favorite of her series detectives, Belgian detective Hercule Poirot is just as engaging and worth getting to know. His gentle arrogance and wit alone are well worth taking the time to try one of the instalments in this particular series, not to mention his brilliant deductive powers. "Halloween Party" is one of Christie's Hercule Poirot works, ranking up there with "Death On the Nile," "Murder On the Orient Express," and "The ABC Murders." The only minor complaint for me is that Captain Arthur Hastings does not appear in this book.

This particular instalment involves Poirot's friend, mystery writer Ariadne Oliver, who is helping a friend prepare a halloween party for preteens of the country village. The party is a huge success until one of the girls, who has a habit of revealing more information than she should, is found drowned in the apple bobbing tub. She had told people earlier in the day that she had seen a murder being committed a year or two earlier. Could someone at the party have heard her and decided to silence the girl before she revealed what she knew? Ariadne Oliver enlists the help of Hercule Poirot, and his brilliant "Little Grey Cells" begin their work. This mystery has a chilling undercurrent, because Christie uses the horrific occurrence of a child being murdered, and Poirot must confront a truly sociopathic killer who will stop at nothing to remain in the dark.

The audio verssion of this book is superb, and features John Moffat as narrator. He originally played Poirot on several BBC radio productions of the series, and does well portraying different characters. I thoroughly recommend the book on a long car ride or while working around the house. It will make the time go much faster.

Agatha Christie presents readers with another gem! As with mostly all of her books, this one certainly does not disappoint. Please give it a chance. Happy reading!

One of the later Hercule Poirot novels, this book is deftly written and keeps you guessing until the end. Everytime I thought I had it figured out something popped up that made me question my conclusions.



This book has all of Agatha Christie's usual flair for plotting out a plausible solution to a seemingly unsolvable crime. In a few places the narrative seemed a little drawn out, but this was more than made up for by an exciting ending and Christie's excellently descriptive writting.



Highly recommended for fans of Agatha Chritie and mystery novels in general.

This is one of Christie's easier mysteries to figure out but the murders are just nasty enough to be almost comical. The drowning of children shouldn't be funny but here, I think Agatha was in a dark, black comedy mood. Besides, the 2 victims are rather obnoxious... so it makes it more humorous. While you'll guess the whodunit right away (how can you not?), she does throw in a few twists at the end that only Poirot could have unravelled. Not a great book, but not bad either. After all, Christie did write it and she seldom wrote a bad story in her career. Good stuff, as one reader mentioned, to curl up with in autumn weather.'


Detail Products
Detail Reviews
Click here for more information


Poirot And Hastings Poirot And Hastings Poirot And Hastings

Apple Macbook - mac, apple


The white Macbook was updated on May 18 2010. There are minor differences between the 2010 Macbook and 2009's model, detailed below.



The UPGRADES are



1) Geforce Nvidia 320M integrated graphics processor with 48 processing cores. This is better than the Geforce 9400M in last years model. Useful for content creation.



2)Mini display port now supports video AND audio with a compatible Mini-DP to HDMI adapter. (Last years model only supported video)



Thats it.



STANDARD FEATURES - from last years model (minor changes noted in brackets)



Polycarbonate unibody

Core 2 Duo processor (2.4ghz - up from 2.26 ghz)

1280 x 800 resolution Glossy LED backlit screen,

iSight camera,



2 GB Ram - 1gb ram sticks x 2

250gb hard drive

8x slot-loading SuperDrive dvd burner



Large multi-touch trackpad ( Intertial scrolling is now enabled ),

2 USB 2.0 ports ,

Wi-Fi - 802.11n specification; 802.11a/b/g compatible, Bluetooth 2.1 and Gigabit Ethernet -10/100/1000.



Inbuilt battery - (which Apple advertises as capable of lasting between 9 to 10 hours.) Not true. Real world battery life is between 3 to 6 hours depending on what tasks you use your computer for.



Software included is OS X 10.6 Snow Leopard and the iLife 09 suite of content creation tools. A 1 year warranty on parts and 90 day telephone technical support is standard.



The Macbook as it is - is good for basic computing activities - such as browsing the web, typing articles or watching movies. However, if you're planning to buy a Macbook for multimedia work, such as editing high resolution photos or HD videos and plan to use multiple applications at the same time, please ensure that you upgrade the ram from 2gb to 4gb.



Why?



Because using a macbook with 2 gb of ram (such as this one) to multitask is a GREAT way to drive yourself crazy as the computer struggles to keep up. Try editing 10 megapixel RAW images while playing music in iTunes with Safari open. 2gb of ram is not at all adequate for multitasking / using processor intensive applications on a Macbook. I understand that Apple has to differentiate between the Macbook and MBPro to justify the price differences but skimping on the ram and putting 2gb inside a $999 product and thus, affecting the user experience is not the way to do it.



Upgrading the ram yourself from 2gb to 4gb is a great idea. Currently, Crucial CT2KIT25664BC1067 4GB 204-PIN PC3-8500 SODIMM DDR3 Memory KIT (2GBx2) costs $39.99. So that brings your total to $1010 ($969 MB + $39.99 Ram) if you upgrade your Macbook's ram



So for only $160 more than your Macbook, (if you take into account the cost of the ram upgrade) a viable alternative is the standard Apple MacBook Pro MC700LL/A 13.3-Inch Laptop which costs approximately $1160 on Amazon. The MBP 13 comes with the added benefits of a more durable aluminum unibody, a backlit keyboard, an SDXC card slot, a firewire 800 port, a thunderbolt port and most importantly, 4gb of ram. Which allows you to multitask effortlessly.



If you're going to use the Macbook for any computationally demanding activities such as content creation, editing large RAW images or HD videos you should upgrade the ram to 4gb or just buy the standard MBPro 13 inch. The significantly faster i5 processor and 4gb ram in the MBPro 13 make a big difference in the daily usage experience.



However, if you only want to use the Macbook for general tasks like writing articles, browsing websites or watching movies, it will handle those duties adequately. At the same time, also keep in mind that if you only need a laptop for basic duties, many other manufacturers offer less expensive laptops which are just as (if not more) capable.



Hope this helps!



P.S. Update - Feb 15 2011 - At present, the Macbook is extremely out of date compared to other computer makers current products. C2D processor, 250 GB 5400 rpm hard drive, 2 gb ram, 2 USB ports. In 2011, these are totally unlike a $999 notebook's specs and more like a netbook's specs (excluding the C2D processor)



I'd recommend waiting for a Macbook update by Apple. Another good option would be to buy a notebook by HP,Sony or Toshiba (for $999 you'll get a much more powerful machine with regards to hardware) or buy the updated 2011 Macbook Pro 13 base model. Apple MacBook MC516LL/A 13.3-Inch Laptop

As a student, I was pretty hesitant to get the MacBook, but after MONTHS of exhaustive research looking for the right laptop (I'm a networking student, and also I am working on my A+ PC Repair certification, so I know a thing or two about PC's and Windows), I decided that I needed a change in my life. I've had an IBM ThinkPad T60 last me four years through school, but after 4 re-install's of XP, I've had enough of the constant attacks of viruses, spyware, etc...and I decided to go with the MacBook.





PROS:



Perfect for web browsing, e-mail, and document creation.

Comes with great features right out of the box: iLife simply rocks; it comes with PhotoBooth, Garageband (where you can create your own music or learn to how play an instrument), Preview, and iMovie (it's basically an easier version of Windows Movie Maker)

Time Machine for backing up documents and pictures, which is FAR SUPERIOR than using the Backup Feature in Windows.

Wi-Fi is SO EASY to set-up using what Apple calls "Airport", just go to the wi-fi antenna at the top of the right-hand corner and set-up right there.

Printing: Coming from a Windows world, and living in a household with a wireless network, setting up a printer was a pain in the butt with Windows, with Mac, it's SO EASY to set-up and begin printing.

BlueTooth: BlueTooth is common in all laptops nowadays, and again, like setting up a printer, it basically connects with the BlueTooth device automatically.

MagSafe Adapter: Apple introduced this idea called MagSafe. If someone got caught on your power cord, it would take the cord and not the computer. I can't tell you how many times my dogs got caught on my IBM power cord and basically almost took the computer with it.

Battery Life: Wow, what a difference. I was coming from a half-hour battery life on my IBM, although Apple says that the battery can last on a 10 hours on a single charge, in the real world, it's falls under 6 hours, but still this is pretty incredible.



CONS:



2GB of RAM. Now coming from a Windows world, Windows is a memory hogger, so the more RAM you have in a Windows system, you are good to go, but with a Mac, it's different. Now if you are compressing 1080p video on a MacBook, the system starts to hick-up trying to catch-up. My advice? Upgrade to 4GB or get the MacBook Pro.

EXPENSIVE: Like all Apple products, it's pretty expensive. I was pretty hesitant to buy a MacBook because it was pretty pricey and being a student i.e. poor, I needed to save up a good chunk of money to buy one of these machines.



So if you are in the market for a new laptop, only need to do some document creating, and web-browsing this Mac is for you. If you want to do some high-end video compression, go with the MacBook Pro since the Pro lines are more aimed at high-end video production. This is definitely a perfect system if all you want is just web-browsing and document creation.



Happy Shopping! - Apple - Apple Macbook - Mac - Laptop'


Detail Products
Detail Reviews
Click here for more information


Wireless Printing - wireless printer, duplex printer


The Brother HL-2270DW is the follow-up to the immensely popular HL-2170W. The 2170W was popular for it's amazing value and print quality. It was also wildly popular because of a neat toner trick to get it to print more pages out of the toner, even when the printer claimed the toner needed replacing. The one big knock of the 2170W was the difficult wireless setup and for being only able to use one network connection at a time-- either Ethernet or WiFi. The 2270DW adds an automatic duplexer and also improves performance.



PROS:

- Fast, fast, fast

- Great print quality

- 3 connectivity options including WiFi

- Automatic duplexer

- Supports Windows XP/2000/Vista/7, Mac OS X, and various Linux distros

- Good looking

- Great value



CONS:

- Starter toner rated at only 700 pages

- Slight curl for duplex printouts

- Uses different and more expensive toner than 2170W

- WiFi limited to 802.11b/g



Once upon a time, I used to have an NEC laser printer, a generic scanner, and an Epson photo printer all on my desk. Well that got old and I consolidated to a multifunction printer and the last 3 printers I owned have all been color inkjet MFP's. The advantages were many but the one drawback was major. The cost per page for inkjet prints became huge, even when printing in black & white. Many color inkjet printers still use color inks when printing in black & white, thus requiring you to replace not only the black ink cartridges, but some of the color ones as well. For me, magenta and yellow frequently ran out, even though we ONLY ever printed in black & white. I'd finally had enough and sought out a solution. As recently as 3 weeks ago, I was able to purchase the 2170W for my parents for a great price and was going to get one myself but they all went out of stock or had gone up in price. Then I found out that they were being discontinued and the 2270DW was the newer model. I pulled the trigger and have not looked back.



2270DW vs. 2170W

The difference between the older 2170W and the newer 2270DW isn't limited to just the change in exterior color. Considering that the base MSRP remains the same, the 2270DW is an outstanding bargain. The 2270DW is slightly faster at 27ppm vs. 22ppm for the 2170W. The 2270DW also uses a 200MHz processor vs. the old 181MHz CPU. The dimensions are identical except that the 2270DW is half an inch taller and happens to weigh almost a half a pound more. I'm guessing the automatic duplexer is responsible for the slightly larger size. Brother also decided to get cheap and included a starter toner rated for only 700 pages, whereas the 2170W was 1000 pages or 2 full reams of paper. The 2270DW also adds GDI printing



INSTALL

The toner and drum are pre-installed but you have to remove it and prep (shake) it before use. I found the Quick Start Guide to be pretty clear and useful for all three connection methods. WiFi configuration is still a bit hokey, but it was easy enough in my opinion.



(USB)

The USB install was a cinch. Install the drivers off of the disc or download them from Brother's website, then plug the USB cable (not included) into your computer and you're good to go.

(Ethernet)

Though the printer's wireless abilities are nice to have, I prefer to use the Ethernet connection to plug the printer directly into my wireless router. This still allows me to print wirelessly from my laptop and via a hardware switch from my desktop. I also don't have to fiddle with the wireless settings and have a stronger, more reliable connection through my router. Using the install wizard, I selected Peer-to-Peer Network Printer as my preferred network print type and was off and running. I performed the same setup on my laptop over WiFi and installed perfectly. One note, I could not quickly find the MAC address to the Ethernet port so I disabled MAC filtering on my router temporarily. If you don't use MAC filtering, then you have nothing to worry about. Afterwards, I found out that you can print the settings from within the Brother print driver and find the MAC address.

(WiFi)

I think a lot of people think they need a WiFi printer to print wireless but most people have wireless routers already that they can just connect the printer to with an Ethernet cable. A printer with WiFi is really only useful if it won't be attached to your router and want it completely independent. As with the 2170W, the 2270DW requires it to be temporarily connected by USB cable or Ethernet to configure the wireless settings, unless, your wireless router supports WiFi Protected Setup or AOSS. The installation wizard on the CD-ROM is pretty straight-forward and I found the install to be painless. Although, if you are using MAC filtering and not broadcasting your SSID, you'll probably want to reverse those temporarily to configure it then switch it back. This is especially true if you are trying to configure the WiFi AFTER you've already set it up by Ethernet and using BRAdmin to do it. To find the internal wireless card's MAC address, hold down the Go button for 10 seconds until it prints a network config page that will enable/disable WiFi and also show you the MAC address. I don't really need WiFi so I only performed the install for the sake of reviewing the procedure.



PERFORMANCE

Time to print has been improved on the 2270DW by nearly 2 seconds, so less time warming up from sleep or off. The actual print speed improvement is less noticeable but 27ppm is insanely fast. I thought my Consumer Reports #1 rated, HP All-in-One Printer was pretty fast, but the 2270DW is at least twice as fast. Text output, even really tiny fonts, looked great. Graphics were also very good. The 2270DW still supports the most current PCL printer language, developed by HP. Oddly though, Brother decided to add GDI capabilities, which is also known as host-based printing and is typically used on low-end printers that put all the printer processing burden on the PC, rather than on the printer's hardware. For example, Brother's bare-bones, cheap 2140 laser printer is GDI only. The 2270DW already has PCL 6 support so I don't see any benefit to having GDI. Even if using a high-end PC might possibly achieve faster to-print speeds, I would think the extra load put on the PC would be a hindrance over just letting the printer's hardware take care of it. I would personally never buy a GDI-only printer. Lastly, given how recently this printer was released, I'm disappointed they didn't include the better 802.11n Wifi support.



NOISE

The 2270DW is noisier than the 2170W, so if you didn't like the 2170W for it's noise, then you definitely won't like the noise from the 2270DW. The fan does stay on for several minutes after it prints but shuts off eventually and then becomes totally silent. The sounds of a laser printer are a welcome change from the wonky noises that my inkjet printers made.



DUPLEXER

If you decide to use the automatic duplexer, it will add more time to your printouts, but what a convenience to not have to manually flip over sheets of paper. Brother rates the duplexer speed to 10 sides per minute. I've always liked the idea of using both sides of a sheet of paper. Save them trees! The duplexer on the 2270DW works well and I have not had any jams, knock on the wood of one of those trees I just saved. Aside from having network printing, the duplexer is my favorite feature of the 2270DW. The only downside to using the duplexer is that it has a noticeable curl. A commenter suggested that heavier paper (24 lb) as opposed to the more commonly used 20 lb paper might help reduce the curl and paper jams.



SOFTWARE

The drivers for the 2270DW include a lot of customization options for your printer, including using the Toner Saver Mode, which is similar to Draft Mode in inkjet printers. Unless you are printing a resume, the Toner Saver Mode is more than good enough for daily print jobs. Additionally, Brother laser printers have the ability to upgrade firmware. Given that the 2270DW is brand new, this is an important ability to note because bug fixes and performance improvements are sure to become available down the road. The most current version of the firmware as of this writing is v1.02. You can also install various administrator utilities for configuration and monitoring (BRAdmin). I used BRAdmin to change the Sleep time from 3 minutes to 2. Another neat feature is that you can use web based management by putting the IP address of your printer into a web browser. This is a great way to review settings and other useful information like how many pages you've printed, remaining drum life, serial number, and firmware version.



COST PER PAGE

The high-yield (2600 pages) genuine Brother toner (TN450) from Amazon is currently $46, which equates to about 1.8 cents per page. That is ridiculous! It is so much cheaper than most inkjets, which can cost between 4 cents and 8 cents per page of text. The only bummer is that the Brother drum unit (DR420) currently costs $84. At that price, if my 2270DW's drum needed replacing, I would probably just end up buying a new printer. The drum is rated at 12,000 pages, which is 24 reams of paper. A lot of factors go into when the drum unit should be replaced but given that I personally don't print more than a ream of paper per year, it would last me 24 years, or basically the life of the printer. Factoring in the cost of a new drum unit, I calculated the cost per page to only increase to 2.5 cents per page. Whenever 3rd party toner cartridges become available, the overall cost is sure to drop even more.



MISC

RE: Toner trick. I believe Brother wised up and created the new TN450 toner specifically to address the toner trick. I could not find any holes or openings in the toner or drum unit that could be covered up like the 2170W's TN360 toner. As long as I get close to the rated output for the toner, I'm ok with this. One of the reasons why the toner trick for the 2170W was so lauded is because Brother's method for measuring the toner was inaccurate. I am hopeful that they have improved their measurement method and the trick is no longer necessary.



I love the 250 sheet main paper tray because I no longer have to feed the paper tray on a monthly basis. The manual feed "slot" only accepts one sheet at a time to feed labels and envelopes. Since I use self-adhesive envelopes, I refrained from printing on them. Also, though I was very tempted to, I did not feed any of my inkjet labels through the manual feed slot. Brother does not recommend using inkjet paper due to the risk of paper jams.



I found the multifunctional "Go" button to be confusing. I think a cheat sheet card would have been very helpful to keep all the functions straight. For example, you can hold it down for various lengths of time to make it do different things like reprinting the last print job or pushing it several times in order to continue printing when the low toner warning light comes on.



The 2270DW uses more energy during printing than the 2170W, but less in standby mode.



Out of the 11 monochrome laser printers that Consumer Reports tested, only 2 garnered their "Recommended" rating. Both were Brother printers.



CONCLUSION

I can't imagine the Brother HL-2270DW not reaching the same heights that the HL-2170W did. The 2270DW performs very well, has great features, and is inexpensive to buy and to operate. If I didn't still need a scanner, my HP multifunction printer would be banished from my home. I highly recommend the Brother HL-2270DW for any home, home office or small office. Brother Printer HL2270DW Wireless Monochrome Printer - Wireless Printing - Brother - Wireless Printer - Duplex Printer'


Detail Products
Detail Reviews
Click here for more information


    ,
  • wireless printing
  • ,
  • wireless printer
  • ,
  • brother
  • ,
  • duplex printer